If you’re a child of the ’80s or ’90s, chances are you’ve spent hours tracing out intricate patterns using the pens and gears of a Spirograph kit. Simple as those parts may be, they’re actually a very clever technique for plotting mathematical functions called hypotrochoids and epitrochoids. [Craig] has spent some time analyzing these functions, and realized you can also implement them with analog circuits. He used this knowledge to design a device called Op Art which generates Spirograph shapes on your oscilloscope using just a handful of op amps.
To draw either a hypotrochoid or an epitrochoid, you need to generate sine and cosine waves of various frequencies, and then add them with a certain scaling factor. Generating sines and cosines is not so hard to do with op amps, but making an adjustable oscillator that reliably churns out matching sine and cosine waves over a large frequency range turned out to be tricky. After a bit of experimentation, [Craig] discovered that a phase-shift oscillator was the right topology, not only for its adjustability but also because it generates sine, cosine and inverted sine terms that all come in handy when drawing various Spirograph shapes.
The resulting waves are added together in a mixer, consisting of a dual-gang potmeter that implements adjustable scaling factors for both the sine and cosine channels simultaneously. Finally, a pair of non-inverting amplifiers buffer the output signals and drive two coax cables connected to an oscilloscope. All op amps are low-power MCP6004 types that consume just 100 uA per channel, allowing the whole thing to r ..
Support the originator by clicking the read the rest link below.
