HPE issues fix to stop some SSDs from self‑destructing

HPE issues fix to stop some SSDs from self‑destructing

If left unpatched, a firmware flaw in some enterprise-class solid-state drives could make data on them unrecoverable as early as this fall



Hewlett Packard Enterprise (HPE) has warned its customers about a bug in the firmware of some of its SAS solid‑state drives (SSDs) that will render the drives dead once they reach exactly 40,000 hours of operation.


In other words, from the time these SSDs are installed and start running, their operation time is exactly 4 years, 206 days, and 16 hours. The affected hardware is used in servers and storage systems.


The good news is that HPE has released a critical firmware upgrade to rectify the issue. Based on the dates that the company started to ship these drives, the drives should not start failing until October 2020 at the earliest. While this should give customers enough time to install the upgrade, the company advises to do so immediately.


“After the SSD failure occurs, neither the SSD nor the data can be recovered,” said HPE and added that it was alerted to the flaw by another SSD manufacturer.


The company noted that other SSD models that were put into service at the same time could also be affected and it was possible they would fail nearly simultaneously. It also stated that the bug isn’t unique to HPE and could affect all customers that have bought these drives.


The bug affects SSDs that are running a firmware version prior to HPD7. These drives are usually deployed in HPE server and storage products, such as HPE ProLiant, Synergy, Apollo 4200, Synergy Storage Modules, D3000 Storage Enclosure, and StoreEasy 1000 Storage. The disk’s t ..

Support the originator by clicking the read the rest link below.