Since their being revealed to our community over a year ago, the various ultra-cheap microcontrollers in the sub-ten-cent price range have attracted a lot of interest but not so many projects. Their slightly annoying programming and PIC12-derived architectures present a barrier not mitigated by their price, when picking up an Atmel or other processor represents a much easier choice. That’s not to say that they aren’t slowly making an appearance though, and a cracking example comes from [Tim], who’s used a Padauk microcontroller to make an addressable 7-segment display. If you’re used to addressable multi-colour LEDs, this extends the idea into the world of numerical information.
The result is a PCB little bigger than the 7-segment display it serves, with interlocking 0.1″ pin connectors allowing daisy-chaining of modules. The extreme low cost of the parts makes it an attractive solution. Software wise it’s driven in a similar manner to addressable LEDs, and he goes into significant detail on its protocol. The firmware can be found in a GitHub repository. He directs readers to the Easy PDK programmer and the Small Device C compiler, which should be of interest to anyone tempted by these processors.
Support the originator by clicking the read the rest link below.
