T'was the night before HaXmas,when all through the house,Not a creature was stirring, not even a mouse.The stockings were hung by the chimney with care,in hopes that St. Nicholas soon would be there.
This may be the way you start your holiday cheer,but before you get started, let me make you aware.I spend my holidays quite differently, I fear.As a white-hat hacker with a UPnP cheer.
And since you may not be aware,let me share what I learned with you,so that you can also care,how to port forward with UPnP holiday cheer.
Universal Plug and Play (UPnP) is a service that has been with us for many years and is used to automate discovery and setup of network and communication services between devices on your network. For today’s discussion, this blog post will only cover the port forwarding services and will also share a Python script you can use to start examining this service.
UPnP port forwarding services are typically enabled by default on most consumer internet-facing Network Address Translation (NAT) routers supplied by internet service providers (ISP) for supporting IPv4 networks. This is done so that devices on the internal network can automate their setup of needed TCP and UDP port forwarding functions on the internet-facing router, so devices on the internet can connect to services on your internal network.
So, the first thing I would like to say about this is that if you are not running applications or systems such as internet ga ..
Support the originator by clicking the read the rest link below.
